Why the reactance of a system under fault condition is low and faults currents may raise dangerously high value. ? (With simple example)
Why the reactance of a system under fault condition is low and faults currents may raise dangerously high value. ? (With simple example)
Because the total Power is same, and under fault condition (Short wiring)...There is no load (Impedance (Z), or Reactance ( XL)= Resistance, and in case of no load, there will be no reactance or resistance, so current will be high) in this condition...So current will be too high, and when power is same, and current increases, voltage will be decrease.
Example,
Suppose, (In normal condition)
P= 10 watt, V = 5 Volts, and Current = 2 Amp.
But in Short wiring Condition, (When current is too high)
Then,
P = 10 Watts, I= 10 A, so
V = P/I….. 10 Watts/10A=1 V.
In case of short wiring, there will be no load (load = may be inductive (XL) or resistive) so when XL (We can say it resistance or opposition of current) = Zero, then Current will be too high.
So we can see that, in case of short wiring, (Faults condition) XL (inductive Reactance) =0, so Current increase, voltage decreases.
